6 change operating mode, 1 change from otp mode, 2 change to otp mode – Tyco Electronics M/A-COM MM23016 User Manual
Page 17: 6change operating mode
Advertising
MM23016, Rev. C
17
6
CHANGE OPERATING MODE
6.1 CHANGE FROM OTP MODE
To change from OTP operating mode to P25, EDACS, or Conventional:
1. Use
to cycle through the menu until the “Mode Menu” appears in the bottom line of the
display.
2. Use
to choose an available mode. Press MENU and confirm (Y/N) with
and press
MENU again.
3. Press the MENU button to confirm.
6.2 CHANGE TO OTP MODE
1. Use
to scroll through available systems until OpenSky is displayed.
2. The radio transitions to OTP mode.
Advertising