Tascam CD-601MKII - Manual (Page 3)

CD-601
MK
II/RC-601
MK
II
Quick Start Guide
»
3
Menu system
Using the menu system, you can make various settings for
the CD-601MKII.
Basic menu operation
1. To access to the menu system, press the MENU key on
the CD-601MKII or RC-601MKII.
Menu number Menu item Current value
Menu contents
You must execute the following operation using the same
unit of which you pressed the MENU key above.
2. Use the +/– keys on the CD-601MKII or the JOG/DATA
dial on the RC-601MKII to select the desired menu item.
3. Press the ENTER key on the CD-601MKII or the * key
on the RC-601MKII to confirm the menu item.
4. Use the +/– keys on the CD-601MKII or the JOG/DATA
dial on the RC-601MKII to select the desired option.
5. Press the ENTER key on the CD-601MKII or the * key
on the RC-601MKII to confirm the setting.
The CD-601MKII automatically exits the menu system.
Note
See the CD-601MKII Owner's Manual for the contents of
each menu item.
Menu items for outputs
Online play output (Menu No. 02)
This menu item determines the output connectors that feed
an online playback signal.
The default is "Off" and an online playback signal is output
from all the outputs.
By setting this item to "On", an online playback signal is
output only from the BALANCED analog and AES/EBU
digital outputs.
Monitor play output (Menu No. 03)
This menu item determines the output connectors that feed
a monitor playback signal.
The default is "Off" and a monitor playback signal is output
from all the outputs.
By setting it to "On", a monitor playback signal is output
only from the UNBALANCED analog and SPDIF digital
outputs.