TC electronic SDN BHD Gold Channel - Manual (Page 36)

TECHNICAL SPECIFICATIONS
36
ANALOG LINE INPUTS
Connectors:
Impedance (balanced):
Phantom supply:
Max. Input Level (balanced):
Sensitivity,
@ 12 dB headroom (balanced):
Dynamic Range (unweighted):
THD+N:
Frequency Response:
Crosstalk
(Line to Mic. Pad 0), worstcase:
(Line to Line or Mic. Pad
20/40/60), worstcase:
Common Mode Rejection,
RS = 40 Ohm:
A to D Conversion:
A to D Delay:
Analog MiC Inputs
Connectors:
Impedance (balanced):
Phantom supply:
Max. Input Level (balanced)
Pad 0/20/40/60:
Sensitivity @
12 dB headroom (balanced):
Dynamic Range, RS = 40 Ohm
(unweighted):
Noise Figure, Pad 0,
RS = 200 Ohm:
THD+N:
Frequency Response:
Crosstalk:
(Mic., all Pad to Mic.,
Pad 0), worstcase:
(Mic., all Pad to Mic.,
Pad 20/40/60), worstcase:
Common Mode Rejection,
RS = 200 Ohm:
A to D Conversion:
A to D Delay:
Analog Outputs
Connectors:
Impedance:
Max. Output Level:
Full Scale Output Range:
Dynamic Range:
THD+N:
Frequency Response:
Crosstalk:
D to A Conversion:
D to A Delay:
XLR balanced (pin 2 hot)
6.8 kOhm
---
22 dBu
- 11 dBu to 10 dBu
> 103 dB
< -90 dB (0.003 %) @ 1kHz, -3 dBFS
20 Hz to 20 kHz: +0/-0.3 dB
< -65 dB, 20 Hz to 20 kHz
< -85 dB, 20 Hz to 20 kHz
> 60 dB @ 50/60 Hz & > 70 dB @ 1 kHz
24 bit (1 bit, 128 times oversampling)
0.8 ms @ 48 kHz
XLR balanced (pin 2 hot)
6.8 kOhm
48V +/- 10%, pin 2 & 3 through 6.81 kOhm
0: -40 dBu, 20: -18 dBu, 40: 2 dBu, 60: 22dBu
0: -82 dBu to -52 dBu, 20: -52 dBu to -30 dBu,
40: -30 dBu to -10 dBu, 60: -10 dBu to 10 dBu
0: >56 dB, 20: >88 dB, 40: >98 dB, 60: >100 dB
< 1.8 dB
0: <-80 dB, 20/40/60: <-92 dB, -3dBFS
0: 20 Hz to 20 kHz, +0/-0.9 dB,
20/40/60: 20 Hz to 20 kHz, +0/-0.3 dBFS
<-66 dB, 20 Hz to 20 kHz
<-82 db, 20 Hz to 20 kHz
> 60 dB @ 50/60 Hz & > 70 dB @ 1 kHz
24 bit (1 bit, 128 times oversampling)
0.8 ms @ 48 kHz
XLR balanced (pin 2 hot)
50 Ohm (active transformer)
22 dBu (balanced)
-10 dBu to 22 dBu
>100 dB (unweighted)
-86 dB (0.005%) @ 1 kHz, -6 dBFS
10 Hz to 20 kHz: +0/-0.5 dB
<-60 dB, 10 Hz to 20 kHz, typical < -90 dB @1 kHz
24 bit (1 bit, 128 times oversampling)
0.57 ms @ 48 kHz
XLR (AES/EBU), RCA Phono (S/PDIF), Optical
(Toslink, ADAT)
AES/EBU (24 bit), S/PDIF (20 bit), EIAJ CP-340,
IEC 958, EIAJ Optical (Toslink), ADAT Lite pipe
HPF TPDF dither 8-24 bit
RCA Phono, 75 ohm, 0.6 to 10 Vpp, 30 - 50 Khz
44.1 kHz, 48 kHz
0.2 ms @ 48 kHz
20 Hz to 23.9 kHz +0.01/-0.1 dB @ 48 kHz
PC Card, 68 pin type l cards
PCMCIA 2.0, JEIDA 4.0
Supports up to 2 MB SRAM
In/Out/Thru : 5 Pin DIN
1/4" phone jack
EN 55103-1, EN 55103-2 and Class B limits of FCC
rules, part 15
IEC65, EN 60065, UL 1419, CSA E65
32° F to 122° F (0° C to 50° C)
-22° F to 167° F (-30° C to 70° C)
Max. 90 % non-condensing
Anodized aluminum front, Plated and painted steel
chassis
56 x 128 dot graphic LCD-display
19" x 1.75" x 8.2" (483 x 44 x 208 mm)
5.5 lbs. (2.5 kg)
100 to 240 VAC, 50 to 60 Hz (auto-select)
<20 W
>10 years
Digital Inputs and Outputs
Connectors:
Formats:
Output Dither:
Word Clock Input:
Sample Rates:
Processing Delay:
Frequency Response DIO:
PCMCIA Interface
Connector:
Standards:
Card Format:
Control Interface
MIDI:
GPI, Pedal, Fader:
General
EMC Complies with:
Safety Certified to:
Operating Temperature:
Storage Temperature:
Humidity:
Finish:
LCD:
Dimensions:
Weight:
Mains Voltage:
Power Consumption:
Backup Battery Life:
Technical Specifications are subject
to change without notice !