Overall functions, Remotech, Remote channel – Yamaha PSR-320 User Manual

Page 58

Advertising
background image

57

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Overall Functions

Remote Channel

..........................................................................................................................................

Sets the MIDI channel on which data from a remote keyboard will be

received. Any of the standard MIDI channels — 1 through 16 — can be
specified. The remote keyboard must be set up to transmit on the specified
remote channel, and the keyboard’s MIDI OUT connector must be con-
nected to the PSR-320/420 MIDI IN connector via a standard MIDI cable.
Refer to the “MIDI Implementation Chart” section (page 68) for technical
details. When set to “oFF” data is received on all 16 MIDI channels. The
default setting — “oFF” — can be recalled by pressing the [–/NO] and [+/
YES]
buttons simultaneously.

• Remote Channel is automatically

turned off when a MIDI “GM ON”
message is received.

• The Remote channel setting is

retained in memory even when
the power switch is turned off, as
long as batteries are installed or
an AC adaptor is connected.

RemoteCh

oFF

MIDI Sequence Recording

Although the PSR-320/420 features a built-in “sequencer (the SONG
recorder is a type of sequencer), the same type of musical information
transfer described above can be used for more sophisticated MIDI se-
quence recording using an external sequencer or music computer. A
MIDI sequence recorder or music computer can be used to “record”
MIDI data received from a PSR-320/420, for example. When the re-
corded data is played back, the PSR-320/420 automatically “plays” the
recorded performance in precise detail.

• Never use MIDI cables longer

than about 15 meters. Cables
longer than this can pick up noise
which can cause data errors.

PSR-320/420

Music

Computer

MIDI IN

MIDI OUT

MIDI OUT

MIDI IN

The PSR-320/420 is capable of receiving the same MIDI data, so a sec-
ond MIDI keyboard connected to the PSR-320/420 MIDI IN connector
can be used to remotely play the PSR-320/420 and select voices as re-
quired.

PSR-320/420

MIDI Keyboard

MIDI OUT

MIDI IN

Advertising
This manual is related to the following products: