Topcom Butler 2505 - Manual (Page 86)

86 Topcom Butler 2505/2510
ENGLISH
6. Select the language of choice by means of the up and down keys.
7. Press OK to validate
4.7 CHANGING THE PIN CODE
Certain functions are only available to users who know the PIN code. By default this is PIN code = 0000.
To change the PIN code:
1. Enter the menu by pressing
/OK
2. Select SETUP using the up and down keys
3. Press OK
4. Select pin code using the up
and down keys
5. Press OK
6. Enter the old 4 figure PIN code.
7. Press OK
8. Enter the new 4 figure PIN code
9. Press OK
10. Enter the new PIN code a second time
11. Press OK to validate
4.8 SETTING THE DIALLING MODE
There are two types of dialling mode:
•
DTMF/Tone dialling (the most common)
• Pulse dialling ( for older installations )
To change the dialling mode:
1.
Enter the menu by pressing /OK
2. Select setup using the up and down keys
3. Press OK
4. Select DIALMODE using the up and down keys
5. Press OK
6. Select the dialling mode using the up and down keys
7. Press OK to validate
4.9. FLASH TIME DURATION
1. Enter the menu by pressing /OK
2. Select SETUP using the up and down keys
3. Press OK
4. Select RECALL using the up and down keys
5. Choose RECALL 1 for short flash time (100ms) or RECALL 2 for long flash time (250ms)
4.10. AUTOMATIC ANSWER
When there is a incoming call and the handset in on the base, the phone automatically takes the line when lifted. This
is the default setting, but can be set OFF:
1 Enter the menu by pressing /OK
2 Select HANDSET using the up and down keys
3 Press OK
4 Select Auto ans using the up and down keys
5 Select ON (for automatic answer) or OFF
6 Press OK
4.11 RESET
It is possible to return the phone to the original default configuration. This is the configuration which was installed when
you first received the telephone.
To return to default settings:
1.
Enter the menu by pressing /OK
2. Select SETUP using the up and down keys
3. Press OK
HL_B2505_10.book Page 86 Friday, December 20, 2002 9:09 AM