Topcom Butler 2505 User Manual
Page 88
88
Topcom Butler 2505/2510
ENGLISH
5.3 CHOOSING PRIORITY RINGING
This function allows you to make the base or one of the handsets ring before the others when there is an external call.
The priority unit will ring a number of times, then the others units will start to ring in turn.
To use this function, you must choose the priority unit, this can be the base or one of the handsets. You can set the
number of rings before the other units start ringing.
Setting the priority unit
1.
Enter the menu by pressing
/OK
2.
Select SETUP using the up
and down
keys
3.
Press OK
4.
Select priority using the up
and down
keys
5.
Press OK
6.
Select “SELECT” using the up
and down
keys
7.
Press OK
8.
Select "BASE" or "HANDSET X" using the up
and down
keys
9.
Press OK to validate
10. Choose the number of rings using the up
and down
keys
11. Press OK to validate
Activate / Deactivate the priority ring
1.
Enter the menu by pressing
/OK
2.
Select Setup using the up
and down
keys
3.
Press OK
4.
Select priority using the up
and down
keys
5.
Press OK
6.
Select "ON" or "OFF" using the up
and down
keys
7.
Press OK to validate
5.4 USING YOUR TELEPHONE WITH A PABX
It is possible to use your telephone with a PABX or a local telephone network.
Use of your telephone with a recent system does not require any special adjustment. With certain older systems, it is
necessary to insert a pause between dialling a prefix and dialling the rest of the number. Your telephone can inserts
this pause automatically during the numeration.
In order to do this you must enter the prefix and the pause length.
It is possible to choose 2 prefixes for 2 different PABX.
To remove the pause, delete the prefix in memory in the same way as you entered it.
Setting the prefix
1.
Enter the menu by pressing
/OK
2.
Select Setup using the up
and down
keys
3.
Press OK
4.
Select PABX using the up
and down
keys
5.
Press OK
6.
Select PBX1 or PBX2 using the up
and down
keys
7.
Press OK
8.
Enter the PIN code (default = 0000)
9.
Press OK to validate
10. Enter the PABX prefix
11. Press OK to validate
Setting the pause duration
1.
Enter the menu by pressing
/OK
2.
Select Setup using the up
and down
keys
3.
Press OK
4.
Select PABX using the up
and down
keys
5.
Press OK
6.
Select PAUSE using the up
and down
keys
7.
Press OK
8.
Select the PAUSE time using the up
and down
keys
9.
Press OK to validate
HL_B2505_10.book Page 88 Friday, December 20, 2002 9:09 AM