Technics SC-EH680 EN - Manual (Page 29)

29
RQT6301
Recording operations
1
2
3
B
EH780
EH580
EH780 EH580
A
B
∫
1 2
DISC1–5
EDIT
3
∫
3
∫
∫
¥ REC
PAUSE
EDIT
EDIT
EDIT
NR Î
2
REC
2
EDIT
REC
EH680
EH680
Recording CDs
Preparation:
³ Do the preparatory steps ( á page 28).
³ Insert the CD(s) you want to record ( á page 8 or 9).
³[EH780]
Press [DISC, 1–5] on the CD changer to select the disc where you want to
start recording, then press [
º ] to stop the disc.
»
A Normal recording
1
Press [
"
] (reverse side) or [
!
] (forward side) then [
º
] to
set the tape direction.
2
Press [
´
REC PAUSE].
The deck goes into the recording standby mode and the indicator “ " ”
or “ ! ” starts flashing.
3
Press [ ! ] on the CD changer or CD player.
Recording starts automatically.
4 seconds after the CD(s) finishes, the deck goes into the recording stand-
by mode.
To stop recording
EITHER
Press [
º ] on the CD changer or CD player.
The deck goes into the recording standby mode 4 seconds later.
OR
Press [
º ] on the deck.
Recording stops immediately but the CD continues to play.
To record programmed tracks
Program tracks before step 1 ( á page 15).
»
B One touch CD editing
This function makes it easier for you to record from discs.
³ When recording, if a track is cut off in the middle at the end of the front
side, it is recorded from the beginning on the reverse side.
(Ensure the reverse mode “
@ ” is selected. )
³ At the end of the reverse side recording stops and the current track will be
interrupted.
After pressing [ " ] or [ ! ] then [ º ] on the cassette deck to set the tape
direction,
Press [EDIT].
Recording starts. In the meantime, “CD EDIT” will scroll across the display.
After edit-recording has finished, the cassette deck automatically stops.
To stop editing
Press [ º ] on the CD changer or CD player.
The cassette deck also stops. “EDIT OUT” scrolls across the display.
To edit programmed tracks
Program the tracks ( á page 15) and press [EDIT].