Timer operations and convenient functions, Using the timers, The play and record timers – Technics SC-EH680 EN User Manual
Page 33: The sleep timer, Press [sleep] to select the time (minutes), Using the timers together
33
RQT6301
Timer operations and convenient functions
B
A
F
PLAY/
F
REC
CLOCK/
TIMER
SLEEP
SLEEP
DIGITAL
S.WOOFER
AV EFFECT
Í
SLEEP
CH SELECT
3D AI
PROGRAM
1
2
3
4
5
6
7
8
9
0
L
/-/--
CANCEL
DISC
VCR/AUX/
6CH INPUT
TAPE/
DECK 1/2
SUPER
SOUND EQ
TUNER/
BAND
2
/
;
1
∫
MUTING
4
5
j
VOLUME
i
CD
EQ
Î
PRO LOGIC SUPER SRND
TEST
SLEEP
Using the timers
»
A
The play and record timers
Turning the timers on and off
The timers come on at the set times if the
.
PLAY/
.
REC indicator is on.
They can be turned on and off by pressing [
.
PLAY/
.
REC].
Checking the timers
Press [CLOCK/TIMER] to select “
.
PLAY” (or “
.
REC”).
The timer conditions are shown in the following order:
Play timer:
Start time
>
Finish time
>
Source
>
Volume
Record timer:
Start time
>
Finish time
>
Selected radio station
The timers can be checked even if the unit is off.
Playing the unit after the timers are set
The unit can be used after the timers are set. Make sure the unit is off
before the set start time.
Note
³
If you turn the unit off and on again while a timer is functioning, the finish
time setting will not be activated.
³
If the unit is on, the timer will not function. The system must be in the
standby mode.
³
This system retains the ON/OFF time settings until you make a new set-
ting. If you make a new ON time setting, you must make a new OFF time
setting.
³
Do not turn DEMO on after setting a timer. The timers will not work while
DEMO is on.
»
B
The sleep timer
Remote control only
This timer turns the unit off after a set time.
While playing a source
Press [SLEEP] to select the time (minutes).
Each time you press the button:
SLEEP 30
---------)
SLEEP 60
---------)
SLEEP 90
^-----
SLEEP OFF
(---
SLEEP 120
(---}
To cancel the sleep timer
Press [SLEEP] to select “SLEEP OFF”.
“SLEEP” goes out.
To confirm the remaining time
(While the timer is functioning)
Press [SLEEP].
The remaining time is shown for about 5 seconds.
To change the setting
Press [SLEEP] to display the remaining time, then press again to select the
required time.
Using the timers together
Any of the timers can be used together, but ensure the unit is off before the
start time for the record and play timers.