Technicolor - Thomson DPL560HT - Manual (Page 20)

EN
17
Operating your Receiver
Storing radio stations:
The receiver can store up to 40 radio stations in
memory. You can enter every single radio station
yourself or the receiver can store all available radio
station automatically in an ascending order.
Automatic preset storing : (FM only)
1. Select the band by pressing BAND
2- Press and hold BAND
on the main unit for 3
seconds. “MEMORY” will
be displayed in red and
will blink during the
automatic storing
process.
Radio frequencies will be scanned and radio station
stored automatically. When all available radio sta-
tions are stored or if all 40 memory locations are full,
the auto preset will stop.
Manual preset
1. Select the band by pressing BAND repeatedly
2. Tune to a radio station (see "Manual tuning" on
page 16 above for details)
3. Press and hold MENU
on the remote control.
"MEMORY" will appear
on the display
4. Select a preset station
number.
5. Press Menu again to confirm selection.
Retrieving preset stations
1. Press BAND to select tuner mode
2. Press MEMORY/MENU button to enter preset set-
ting mode (MEMORY icon shows on display),
Press
+ PR - to select preset station.
N O T E
Weak signal can affect the "Automatic Preset
Storing function" efficiency. Adjust the antenna
for the best reception for more efficient search.
TUNING MEMORY FM/AM
SOURCE
SOURCE
TUNING MEMORY SETUP TEST TON
OK
TUNING MEMORY BAND
SOURCE
SOURCE
TUNING MEMORY BAND
SOURCE
SOURCE
TUNING MEMORY BAND
SOURCE
SOURCE
DPL560-EN 4/11/02 5:28 PM Page 21