Topcom BUTLER 700 C - Manual (Page 7)

USER MANUAL Butler 700
- 7 -
6 Enter the base number for this handset, ( from 1 to 4 ). The flashing
numbers are the numbers already used for other bases.
7 Press .
8 Enter the confidential code of the Freeport 700 base (1111 by default).
9 If the handset has located the base, it will display the base
identification number. Validate the base association by pressing
or invalidate by pressing .
10 If the handset does not locate the base, it will return to the previous
configuration after a few seconds. Try again by changing the base
number and check if you are not in an environment where there is
interference.
ASSOCIATION TO ANOTHER DECT BASE
The DECT base has to be GAP compatible, otherwise you will not be able to associate
the Butler 700C handset to this base.
1 Put the base in association mode. Refer to the user manual of your
DECT base.
2 When the DECT base is in association mode, enter the menu of your
Butler 700C by pressing .
3 Select REGISTER.
4 Press .
5 Enter the base number for this handset, ( from 1 to 4 ). The flashing
numbers are the numbers already used for other bases.
6 Press .
7 Enter the confidential code for the DECT base. (Check the manual of
the DECT base)
8 When the handset has located the base, it will display the base
identification number. Validate the base association by pressing
or invalidate by pressing .
9 If the handset does not locate the base, it will return to the previous
configuration after a few seconds. Try again by changing the base
number and check if you are not in an environment where there is
interference.