Telular SX5D - Manual (Page 8)

Phonecell ® SX5D GSM 1 User Manual
SX5 SETUP
SIM Card Installation
The SX5 requires a Subscriber Identification Module (SIM) for normal operation. The service
provider supplies the SIM card, which carries the account information needed to operate the
SX5D. The SIM compartment is on the back of the SX5.
NOTE: If you don’t have a SIM card, contact your network service provider.
1. Remove the power supply if it has already been connected. The power supply must be
removed whenever a SIM Card is removed or installed.
2. Remove the SIM compartment cover by removing the screw - see Figure 1.
3. Open the SIM compartment holder.
4. Line up the SIM card with the arrow on the SIM card holder - see Figure 2.
5. Gently insert the SIM card in the slot of the SIM card holder.
6. Close the SIM card holder.
NOTE: Do not force the SIM card holder shut. Make sure the SIM card is aligned properly
with the directional arrow on the holder.
7. Reattach the SIM compartment cover with the screw.
Emergency Batteries
Install Batteries
1. Remove the battery access door screw located on the bottom of the unit - see Figure 3.
2. Press the battery access door tabs and remove the battery access door.
3. Install 4 “AA” alkaline batteries (not supplied).
4. Reinstall the battery access door using the screw - see Figure 4.
SIM Compartment Cover
SIM Card
Holder
SIM Card
Figure 1 - SIM compartment cover.
Cover Screw
Figure 3 – Battery access door.
Battery Access
Door Screw
Battery Access Door Tabs
Battery Access
Door
4 AA Batteries
Figure 4 - Battery installation.
Figure 2 - SIM card installation.
WARNING!
Only “AA” alkaline batteries are to be used with the Phonecell ® SX5.
Use of any other batteries may result in fire and/or other damage to the unit.
!