Toto LVU2E1 - Manual (Page 13)

ENGLISH - 11 -
For multi-display environments on Windows 2000:
2K-1: Access the Display Properties dialog box and click the Settings tab.
2K-2: Select "Ture Color (32bit)" from the Colors drop-dowm menu.
2K-3: Set a resolution using the Screen Area slider.
2K-4: Click "Advanced" on the Settings tab, and another dialog box appears.
2K-5: Select the Quadro FX 1500 tab, and a popup menu appears to the side.
Note:
When another graphics card coexists, the Quadro FX 1500 tab will not appear.
In that case, a display on another card needs to be detached for now. Right-click
the subject display icon on the Settings tab and uncheck "Attached" on the right-
click menu, or uncheck "Extend my Windows desktop onto this monitor."
2K-6: Select "nView Display Settings" from the menu and "Dualview" from the nView
Display Mode drop-down menu on the Qadro FX 1500 tab and click "OK."
Note: See Chapter 4 for detailed information on multi-display modes.
2K-7: When a message prompting restart of the computer appears, click "Restart now."
2K-8: After restarting the computer, click "Finish" on the NVIDIA Dualview installation
completion message.
2K-9: A message prompting restart of the computer appears again. Restart the computer.
(Go on to All users below or Portrait orientation on ME201L/ME251i/CCL202/
CCL212/CCL250i
on page 13.)
All users:
1 Select Display Properties>Settings(tab).
Select a display icon, and if the Display section says "Plug and Play monitor on Elza
TOTOKU LVU2E1," the corresponding display is connected to LVU2E1.
2 In a multi-display setup, select the icon for the fi rst display on this card and verify
"Extend my Windows desktop onto this monitor" is checked.