Technicolor - Thomson TU-SZT105A - Manual (Page 8)

4.1 Installing Your Digital Receiver – Quick Set Up Guide
the digital receiver is installed, or after
restored (section 6.4), you will be
asked to select the video connection format. Select the
ion
S
The first time the digital receiver is installed, or after Default
stored (section 6.4), you will be asked to select
the region you live in so that the digital receiver will display the
first time the digital receiver is installed, or after Default
(section 6.4), you will be asked to select
your preferred aspect setting. This is a choice of the Wide
P
The audio can be received in two format types, Dolby
broadcasters sometimes use both
types, please select which format that you prefer to listen
Condition is restored ( Section 6.4), the digital receiver will
lly scan for available digital services. This may take
Installation
SCART Mode
The first time
Component
Composite
RGB
Please select SCART mode
Default Condition is
video format that is the same as the AV lead connect
you have made to the TV display (refer Quick Connect
Guide section 4).
elect Region
Western Australia
Tasmania
Northern Territory
Australian Capital Territory
Please select your state / region
South Australia
New South Wales
Victoria
Queensland
Condition is re
correct local time. The regions are New South Wales, Victoria,
Queensland, South Australia, Western Australia, Tasmania,
Northern Territory and Australian Capital Territory and are
selected by the up/down cursor keys.
Select Aspect Ratio
The
Wide (16:9)
Centre Cut
Letterbox
Please select your preferred
display aspect ratio Condition is restored
(16:9), Normal / Centre Cut (4:3) or Normal / Letter Box (4:3).
Select the aspect that is correct for your TV display. This can be
changed at a later date.
referred Audio Type
MPEG1
Dolby Digital
Please select the audio type
you prefer
Digital and MPEG. The
to. This format will be select when the broadcaster
transmits both types. This can be changed at a later date.
Autotune
The first time the digital receiver is installed, or after Default
Automatica
Up to 5 minutes. After tuning finishes press OK.
8