Turbosound ASPECT TA-880 - Manual (Page 45)

user manual
TA-880
TA-880 user manual
Page 45
LMS-D6 LOUDSPEAKER MANAGEMENT SYSTEM
1. LCD Display - Shows menu options, output information and adjustment parameters.
2. Gain Keys - Two input and six-output ‘gain’ keys allow instant access to the gain
screen for each channel. Pressing a second time selects the last function edited.
3. Next Key - Moves the display forwards through the list of available parameters for
the current input or output channel.
4. Back Key - Moves the display backwards through the list of available parameters for
the current input or output channel.
5. Menu Key - Activates the main menu on the LCD display. Pressing a second time
selects the last menu edited. Different menus are selected by pressing the ‘BACK’
and ‘NEXT’ keys or using the ‘FREQ’ control.
6. Enter Key - Enters the chosen menu and confirms menu selections.
7. OUT Key - Exits the menu.
8. Bypass Key - Allows the currently displayed parametric section to be bypassed.
(Note: The Highpass / Lowpass filters and limiters can not be bypassed.)
9. Parameter Controls - The three velocity sensitive rotary encoders allow the relevant
parameter, on the LCD screen, to be adjusted.
10. Input Meters - Displays available headroom before input clipping occurs. The
bottom green LED is set at -24dB, with the orange 0dB LED set at 3dB below
clipping. The top, red LED displays digital overflow and can therefore light without
all the other LEDs becoming illuminated.
11. Output Meters - Displays headroom before limiting occurs. The bottom green LED is
set at -24dB, with the orange ‘LIM’ LED set at the limiter threshold for that channel.
The top, red LED indicates 4dB of limiting.
12. Mute Keys – One mute key per output channel.
5 4 3 6 9 10 11 12
1 8 7 2
'Q' 3
LIM
-3
-24
LIM
-3
-24
LIM
-3
-24
MENU
BYPASS
ENTER
OUT
FREQ 'Q' GAIN
CLIP
-6
-24
GAIN GAIN GAIN GAIN GAIN GAIN GAIN GAIN
MUTE MUTE MUTE
A B 1 2 4 5 6
DIGITAL LOUDSPEAKER MANAGEMENT SYSTEM
LMS-D6
LIM
-3
-24
LIM
-3
-24
<BACK NEXT>
TQ-440