Teledyne WIRELESS COMMUNICATION MODULE 2102 - Manual (Page 29)

5-1
2102 Wireless Communication Module
Section 5 Maintenance
5.1 Maintenance
Overview
The 2100 Series system is designed to perform reliably in
adverse conditions with a minimal amount of routine service
requirements.
Maintenance intervals are affected by many variables. The
number of modules powered by a Battery Module, the Data
Storage Rate, and type of sensor will all affect the battery life.
Humidity levels obviously affect the service life of the desiccant,
and the amount of debris in the stream can drastically alter the
channel conditions.
5.1.1 Cleaning The Wireless Communication Module case may be cleaned with
mild detergent and warm water. Before cleaning the module,
make sure that all protective connector caps are in place.
5.2 How to Obtain Service The internal components of the module are not user-serviceable.
The case is completely sealed to protect the internal components.
To repair the unit, the case must be broken open and replaced. If
you think your module requires repair, contact Teledyne
Teledyne Isco’s Technical Service Department.
Teledyne Isco, Inc.
Technical Service Dept.
P.O. Box 82531
Lincoln, NE 68501 USA
Phone: (800) 228-4373
(402) 464-0231
FAX: (402) 465-3085
E-mail:
[email protected]
Corresponding with a Teledyne Isco Technical Service Represen-
tative can often resolve the problem without the need to return
the item. If the difficulty cannot be resolved you will be issued a
Return Authorization Number (RAN) and information on
returning it to the factory.