3 ac power, 2 switch aspect description, 1 front panel – TP-Link TL-SG2224WEB User Manual
Page 15
8
Web Smart Gigabit Switch Family User's Guide
TL-SG2216WEB/TL-SG2224WEB
2. Insert the switch into the rack.
3. Fix the switch to the rack with the rack screws (not provided).
3.1.3 AC Power
The switch can be used with an AC power supply 100 to 240V AC, 50 to 60Hz.
The switch’s power supply will adjust to the local power source automatically.
3.2 Switch Aspect Description
3.2.1 Front Panel
The front panel of TL-SG2216WEB is configured as follows:
9
11
13
15
10
12
14
16
1
3
5
7
2
4
6
8
SFP 1
SFP 2
1
2
3
4
5
6
7
8
Link/Act
1000Mbps
FAN2
FAN1
RESET
Link/Act
1000Mbps
9
10 11 12 13 14 15 16
Power
System
16-port Gigabit Web-Smart Switch
TL-SG2216WEB
R
Figure 3-2. TL-SG2216WEB Front Panel
16 10/100/1000Mbps RJ-45 GIGA ports: designed to connect to
the device with a bandwidth of 10M, 100M or 1000M. Each has a
corresponding Link/Act and 1000Mbps LED.
SFP ports: designed to install the SFP module. It uses the Link/Act LED of
the GIGA ports with which compose a combo port (see 5.2.1 for details of
combo ports).
Reset Button: Press this button for three seconds to the reset software
setting back to factory default setting.
LEDs
1)
Power LED: Will be solid red when power is supplied to the switch and is
operating normally.
2)
System LED: Will flash green when the CPU of the switch is working