TP-Link TL-SG2224WEB - Manual (Page 68)

61
Web Smart Gigabit Switch Family User's Guide TL-SG2216WEB/TL-SG2224WEB
Mirror Mode: You can set the mirror mode to monitor the ingress traffic,
egress traffic, or both traffic. You can also disable the port mirroring.
Mirror Port: Defines the port to monitor the traffic, Trunk member can't
define here.
Mirrored Port: Indicates the port from which the packets are mirrored,
Trunk member can't define here. At most 4 ports can be mirrored
simultaneously.
Clean Up: Clean Up the Mirrored Port list.
Notice:
1) Trunk member port can be neither Mirror Port nor Mirrored Port.
2) The Mirror Port can’t be the Mirrored Port at the same time.
3) At most 4 Mirrored Ports can be set.
4) If a 100M SFP module is installed,it can’t be the Mirror Port.If it has been
configured as the Mirror Port before,please modify it.
5.3.8 Virtual Cable Test
The virtual cable test feature lets you test the continuity of the cable circuit. It
contains the following fields:
Figure 5-45 Virtual Cable Test
Test Port: Select the port you want to test.




