TRENDnet TEW-435BRM - Manual (Page 35)

Wireless ADSL Router User Guide
32
Wireless Station Configuration
This section applies to all Wireless stations wishing to use the TEW-435BRM's Access Point,
regardless of the operating system which is used on the client.
To use the Wireless Access Point in the TEW-435BRM, each Wireless Station must have
compatible settings, as follows:
Mode The mode must be set to Infrastructure (rather than Ad-hoc)
Access points only operate in to Infrastructure mode.
SSID (ESSID) This must match the value used on the TEW-435BRM. The default
value is default
Note! The SSID is case sensitive.
WEP By default, WEP on the TEW-435BRM is disabled.
• If WEP remains disabled on the TEW-435BRM, all stations must
have WEP disabled.
• If WEP is enabled on the TEW-435BRM, each station must use the
same settings as the TEW-435BRM.