Toshiba GD-1170 - Manual (Page 46)

44
2.SENDING A FAX
5.Specifying the Remote Fax (Cont.)
2
7 Press the button for the remote Fax that you want to send to, and then
press the [ENTER] button.
• If the remote FAX to be selected is one, the direct transmission (On-hook Transmission) can be performed.
• Each screen displays 8 destinations. To view destinations not displayed on the screen, press the [Prev] or
[Next] button to switch the screens.
• To continue searching by the address, press the [SEARCH ADDRESS] button.
• To continue searching by the ID number ( P.40 “Searching by ID number”), press the [KNOWN ID] button.
8 To perform the memory transmission, press the [START] button to
complete the operation. To perform the direct transmission, follow the
procedure from step 9.
9 To perform the On-hook transmission, press the [MONITOR/PAUSE]
button and the [DIAL] button.
10 When you hear the answer tone (short high-pitched tone) through the
built-in speaker, press the [START] button.