Tascam US-122MKII - Manual (Page 10)

10
TASCAM US-122MKII
Front panel
w MIC IN (L, R) jacks (XLR balanced)
These are analog mic input jacks. The wiring
is as follows: pin 1 = ground, pin 2 = hot, pin
3 = cold.
e LINE IN L jack (TRS 1/4” phone jack)
These are balanced line input jacks.
r PHONES jack (stereo 1/4” phone) This
is a headphone output jack.
CAUTION
Use the PHONES/LINE OUT knob to
minimize the volume before connecting
headphones. Failure to do so could cause
a sudden burst of loud noise, which might
result in hearing damage, for example.
NOTE
The headphone output level and the line
output level are both adjusted using the
combined PHONES/LINE OUT level knob.
t LINE IN R/GUITAR IN jack (TRS 1/4”
phone jacks) These are balanced line input
jacks. This also accommodates guitar input.
If the top panel
MIC/LINE - GUITAR select
switch is in the GUITAR position, this
operates as an unbalanced input jack for
guitar. If the
MIC/LINE-GUITAR select switch
is in the MIC/LINE position, this operates as
a balanced input jack. (Sleeve = ground, tip
= hot, ring = cold)
2 – Parts of the US-122MKII