Adjusting the color convergence, Manually adjusting the color convergence – Toshiba COLORSTREAM SRS TOUCHFOCUS 57H84 User Manual

Page 26

Advertising
background image

I

n

t

r

o

d

Connecting

y

our T

V

Using the

Remote Contr

ol

Setting up

y

our T

V

Using the T

V’s

F

eatur

es

Appendix

Index

26

(E) 46H84 51H84 57H84 65H84

Adjusting the color convergence

This projection TV uses three separate TV tubes: red, green, and blue.
The red, green, and blue images are projected onto the screen where
they converge to form a full-color picture. You can see a clear picture
only when the three images converge correctly. Convergence may drift
over time or if you move the TV. If you can see clear images on your
TV screen, skip this procedure.
It is recommended that the adjustment is made only after the TV has
been on for at least 30 minutes.

Automatically adjusting the color convergence using
TouchFocus™

Press TouchFocus on the TV once. The TV will enter auto-
convergence mode, and adjust convergence automatically.

TOUCH FOCUS

When the adjustment is complete, the normal picture appears.

You can adjust the convergence manually described as follows for
more detailed convergence adjustment than by TouchFocus.

Manually adjusting the color convergence

You can use the CONVERGENCE in the PICTURE menu to
perform continual auto-convergence (TouchFocus) and manual
convergence adjustments.

1. Press MENU, and then press

x or • until the PICTURE menu

appears.

2. Press

y or z to highlight CONVERGENCE, and then press

ENTER to display the pull-down menu.

3. Press

y or z to highlight ADJUST, and then press ENTER.

The TV will perform TouchFocus. When the adjustment is
complete, the TV will enter 56-point static convergence mode
automatically.

A D J U S T
R E S E T

: START

MODE

P I CTURE

P I CTURE SETT I NGS
D I SPLAY FORMAT

RESET

SAVE

C I NEMA MODE
CONVERGENCE

S E L E C T

:

ENTER

EX I T : TO F I N I SH ADJUSTMENT

ENTER : TO ADJUST CONVERGENCE

: TO SELECT POS I T I ON

If you see separate red, blue, or green crossed lines (or red or blue
shadows next to white lines), you need to adjust the convergence.

4. Press

yzx • to move the cursor to the position you want to

adjust.

5. Press ENTER repeatedly to select RED or BLUE adjusting mode

(red crossed lines or blue crossed lines), depending on which
color needs adjusting.

Touch Focus

TV/VIDEO

EXIT

MENU

CHANNEL

VOLUME

1

2

3

4

5

6

7

8

9

ENT

100

0

POWER

RECALL

CHRTN

FAV

FAV

TV / VIDEO

+10

PIC

SI

ZE

EXIT

INFO

POP DIRECT CH MUTE

SLEEP

TV
CBL/SAT
VCR

DVD

VOL

CH

FAVORITE

ENTER

DVDMENU

MENU

TO

P

ME

NU

GU

IDE

CL

EA

R

E

NT

ER

TouchFocus™

TV front panel

ENTER

MENU
yzx •

(continued on next page)

MENU

x •zy

cursor

Advertising