Toshiba COLORSTREAM SRS TOUCHFOCUS 57H84 - Manual (Page 49)

Intr
oduction
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V’s
F
eatur
es
Appendix
Index
49
(E) 46H84 51H84 57H84 65H84
TouchFocus TV/VIDEO EXIT MENU CHANNEL VOLUME
Selecting the video input source
Press the TV/VIDEO on the remote control or the TV to view a signal
from another device connected to your TV, such as a VCR or DVD
player (see illustrations below). You can select ANT 1, VIDEO 1,
VIDEO 2, VIDEO 3, ColorStream HD1, ColorStream HD2, HDMI,
or ANT 2 depending on which input jacks are used for connecting the
devices (see “Connecting your TV” on page 8).
SOURCE
0 :
1 :
2 :
3 :
4 :
ANT 1
HDM I
V I DEO 1
V I DEO 2
V
Color Stream
5 :
6 :
ANT 2 7 :
I DEO
HD1
Color Stream HD2
3
SELECT I ON
0- 7 TO SELECT :
SOURCE
ANT 1
HDM I
V I DEO 1
V I DEO 2
V
Color Stream
ANT 2
I DEO
HD1
Color Stream HD2
3
SELECT I ON
TV / V I DEO : TO SELECT
Labeling the video input sources
The video label feature allows you to label each input source for your
TV from the following preset list of labels:
– – – : Uses the default label name
VCR : Video cassette recorder
DVD : DVD video
DTV : Digital TV set-top box
SAT
: Satellite box
CBL : Cable box
To label the video input sources:
1. Press MENU, and then
press x or • until the
CUSTOM menu appears.
2. Press y or z to highlight
VIDEO LABEL.
3. Press ENTER to display the VIDEO LABEL menu.
4. Press
y or z to highlight the video source you want to label and
then press ENTER.
5. Press y or z to select
the desired label for
that input source.
6. Finish labeling the other video sources as desired. To return to the
previous menu, press y or z to highlight CUSTOM MENU,
and then press ENTER.
7. To exit the menu, press EXIT.
Note:
• When ColorStream HD 1 or HD 2 is
selected, the VIDEO OUT jack does not
output a signal. To receive a VIDEO OUT
signal, use a standard video or S-video IN
connection instead of the ColorStream
connection.
• In POP double-window mode, the main
window will display 480i signals only. If you
select ColorStream HD1 or ColorStream
HD2 while the POP picture is active, the
message “Not Available” will display.
1 2 3
4 5 6
7 8 9
ENT 100 0
POWER RECALL
CHRTN
FAV
FAV
TV / VIDEO
+10
PIC
SI
ZE
EXIT
INFO
TV
CBL/SAT
VCR
DVD
VOL CH
FAVORITE
ENTER
DVDMENU
MENU
TO
P ME
NU GU
ID E
CL EA
R E NT
ER
TV/VIDEO
MENU
yzx •
EXIT
TV/VIDEO
Pressing TV/VIDEO on the remote
control displays the current signal
source (press TV/VIDEO again or
0-7 to change) Pressing TV/VIDEO on the TV changes
the current signal source
TV front panel
Note the following regarding the
HDMI source selection:
This TV is not intended for connection
to and should not be used with a PC
(personal computer). See “Connecting
a device to the HDMI input” on page
15 for details.
ENTER
MOVE : : START ENTER
ON T I MER
CUSTOM
SLEEP T I MER
0 0 h 0 0 m
0 h 0 0 m
CC OFF
FAVOR I TE CH
SHADED
CH LABEL I NG
V I DEO LABEL
BACKGROUND
V I DEO1
V I DEO LABEL
– – –
V I DEO2 VCR
DVD
DTV
SAT
CBL
V I DEO3
C o l o r S t r e a m HD1
C o l o r S t r e a m HD2
HDM I
CUSTOM MENU
S E L E C T : : SET ENTER