Toshiba IK-TF9U - Manual (Page 15)

15
-- SHUTTER --
MODE E.TRG
E.TRG 1P SNR
TRG.P
EXP.
50ms
PART OFF
<MODE = E.TRG E.TRG = 1P SNR>
• E.TRG mode
• Partial scanning switch
OFF/25fps/30fps/35fps/40fps/45fps/50fps/
E25fps/E30fps/E35fps/E40fps/E45fps/E50fps
1P SNR, 1P SR, PW SNR, PW SR, RR
0.01 ms 0.02 ms 0.4 ms 1 ms 20 ms 50 ms
0.01 ms
step
0.02 ms
step
0.1 ms
step
1 ms
step
2 ms
step
• Input trigger pulse setting at 1P SNR and 1P SR
Input trigger pulse : positive polarity
• Exposure time setting at 1P SNR and 1P SR
• Sutter mode MANU, SS, E.TRG
Input trigger pulse : negative polarity
Move up down
By pushing
MENU UP, DOWN
Set by pushing
DATA UP, DOWN
(1. 3) Changing each setting in E.TRG mode
The E.TRG has five modes; 1P SNR, 1P SR, PW SNR, PW SR, PR.
First set the "
→
" to MODE and select E. TRG, then set the "
→
" to E.TRG and select the desired E.TRG mode.
(1. 3. 1) Changing each setting in 1P SNR mode
(a) Changing the polarity of inputting trigger pulse setting
1 Set the "
→
" to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.
2 Select either , by pushing [DATA UP], [DATA DOWN] buttons.
(b) Changing 1P SNR exposure time setting
1 Set the " → " to EXP. by pushing [MENU UP], [MENU DOWN] buttons.
2 Set the exposure time by pushing [DATA UP], [DATA DOWN] buttons.
(c) Changing the partial scanning setting
1 Set the "
→
" to PART by pushing [MENU UP], [MENU DOWN] buttons.
2 Select the mode by pushing [DATA UP], [DATA DOWN] buttons.