TIC WRS010 User Manual
Page 8
8
Note: It is possible for your speakers to be “out of phase” where switching on
the remote switches on one speaker but not the other. In this case completely
power down the system removing any batteries in the speakers, then power up
and switch on again, regaining balance.
Exterior Installation…
Some general notes and tips for when you install your new TIC Wireless Outdoor
Rock Speakers in an Exterior environment.
1. Don’t forget to test your new product prior to exterior installation.
2. Carefully unpack your new TIC WRS010 outdoor wireless rock speakers
and inspect all components as previously described.
3. Carefully connect your “Mini Rock” broadcast transmitter to a working
sound source. Attach any output devices, CD’s, MP3’s, Ipod, receiver
amplifier etc. Ensure it has power and is switched “On”. (Green LED)
4. Locate your new exterior rock speakers using the previously described
placement techniques; ensure no architectural or other broadcast signal
obstructions.
5. Power up your speakers ensuring the Green signal light is lit.
6. Using your remote control, switch “On”, then adjust the volume of your
outdoor speakers.
7. Be aware of the Red LED light flashing when battery power is low.