Telex Echelon 25XT - Manual (Page 3)

Page 1
Headband Size Adjustment
To adjust the headband size, move the
earcup sliders up or down on the
headband. Size is properly adjusted
when the earcups are centered over the
ears. It is important to make the same
adjustments to both sides of the
headband to keep the headband and
pad properly centered over the head.
HIGH MEDIUM LOW
Comfort Cam™
ADJUSTMENT KNOB SETTINGS
Headband Pressure Adjustment
There are three pressure settings for
headband comfort. Increasing the
pressure will improve the seal between
the earcup and the head for greater
noise reduction. To change the pressure
setting, remove the headset and fold the
earcup inward as shown, then rotate the
Comfort Cam adjustment knob to the
desired setting. Repeat for both earcups.
Both sides of the headband should be
set to the same pressure setting to keep
the headband properly centered on the
head.
Figure 1
Headband Size Adjustment
Figure 2
Headband Pressure Adjustment
Left or Right Side Microphone Placement
1. Rotate the boom as shown.
2. Reshape the boom so that the
microphone will be at the
corner of the mouth.
Figure 3
Rotating and Reshaping the
Boom