Technicolor - Thomson ASR08T - Manual (Page 11)

12
ENGLISH
PROGRAMMING A NEW CHANNEL
4. Audio mode selection
Press the
key to display the audio mode, e.g. : "Ton1".
Press several times to display all the available modes.
DISPLAY MODE DE-EMPHASIS BANDWIDTH
"Ton 1" Stéréo Wegener Panda 130 kHz
"Ton 2" Mono Wegener Panda 130 kHz
"Ton 3" Mono 50 µs 280 kHz
"Ton 4" Mono 75 µs 280 kHz
"Ton 5" Mono J 17 280 kHz
5. Audio Frequency Adjustment
Press the
key to display the frequency in MHz, e.g. : "A702".
You can enter the desired frequency directly (three digits) using the 0-9 numeric keypad, or
change the displayed value in steps of 10 kHz using the VOL + and VOL - keys.
Values outside the 5.5-9.99 MHz band are not accepted.
Press the
key several times to display the eight pre-programmed audio modes in turn.
5. Storing in Memory
Press the two STORE keys together to store all settings in memory. The programme is
displayed again.
6.50 MHz 6.60 MHz 7.02 MHz 7.20 MHz
7.38 MHz 7.56 MHz 7.74 MHz 7.92 MHz
AUDIO
AUDIO
A-M