Appendix b: troubleshooting – TP-Link TL-SF1016 User Manual
Page 14
Advertising
11
Appendix B: Troubleshooting
1. The Power LED is not lit
¾
Make sure the AC power cord connected the Switch with power source
properly.
¾
Make sure the power source is ON.
2. The Link/Act LED is not lit when a device is connected to the
corresponding port
¾
Make sure that the cable connectors are firmly plugged into the Switch and
the device.
¾
Make sure the connected device is turned on and working well.
¾
The cable must be less than 100 meters long (328 feet).
Advertising
This manual is related to the following products: