TANDBERG D14041.02 - Manual (Page 9)

5
TANDBERG FieldView Device User Guide D14041.02 January 2008
2.3. Calibrating the Integrated Touch Panel
The Viewfinder display on the back of the FieldView Device includes an
integrated touch panel designed for use with the stylus that has been included
with the FieldView Device. The Viewfinder touch panel allows control of many
FieldView Device features, including menu selection, configuration, text entry
(via on screen keyboard) and on screen button selection. In addition, the touch
panel can be used to draw over images and video. See Telestration on page
12.
Important: When you are using the Viewfinder screen, always use the stylus
provided with the FieldView Device. Do not use other objects, as this could
damage the Viewfinder screen. Tap the screen lightly. Do not press hard or
strike the screen.
When you first start the FieldView Device, if the touch screen has not been
calibrated, the FieldView Device presents a calibration screen. Follow the on-
screen instructions to calibrate your touch panel to permit precise control.
2.3.1. Displaying the calibration screen using navigation pad buttons
If the touch screen is incorrectly calibrated to the extent that it can’t be used
to navigate the menu settings, you can access the screen calibration function
using the keypad: simultaneously press and hold the Up and Down buttons
while not pressing the Enter button. This will display the touch calibration
screen.
Touch screen calibration