TANDBERG Codec C90 D14129.02 - Manual (Page 47)

D14129.02—NOVEMBER 2008 47
Codec C90 Administrator Guide
Contents Introduction Getting started About the menus About the settings Settings Library Cameras Appendices Contact us Appendices
The software upgrade procedure
Contact your TANDBERG representative to obtain the software upgrade file.
Software upgrade
The Upgrade tab lets you select the software
upgrade file for TANDBERG Codec C90 and install
the new software.
Please follow the procedure described on this
page.
Open a web browser and enter the 1.
IP address to connect to the Codec
C90 by HTTP
Select the 2. Upgrade tab
Click 3. Browse... and locate the
upgrade file (.PKG)
Click the 4. Install software button to
start the installation.
Leave the system for a few minutes 5.
to allow the installation process to
complete. The upgrade process
takes about 4–5 minutes.