Thermador WD30 EU - Manual (Page 6)

English 4
Cabinet Cutout Dimensions Instructions are based on standard American cabinets 36” (914 mm) high and 24”
(609 mm) deep with a 25” (635 mm) countertop. If using non-standard cabinets,
alter dimensions accordingly.
Cabinet opening bottom must be able to support 110 pounds (50 kg).
Custom Drawer Front Dimensions
(Optional)
Build custom drawer front to the dimensions specified in the following table. All four
edges must be finished. If using wood, the back must be sealed to prevent moisture
damage.
Dimension Model
27” (685 mm) 30” (762 mm)
A 25 3/8” (645 mm) 28 3/8” (721 mm)
B 11 1/8” (283 mm) 11 1/8” (283 mm)
C 24” (610 mm) 24” (610 mm)
1/2"
(12.7mm)
1/2" (12.7mm)
Frame Overlaps
Cabinet
Frame
Overlaps
Cabinet
1-1/2" (38.1mm) min. to
opening above
Wall
Receptacle
Allow 3-1/2" (88.9mm) in front
for drawer handle clearance
A
C
D
D
B
A
F
D
B
E
C
G
Pilot Holes
1/2" (12.7 mm)
Diameter Hole