Toshiba Strata DK 16 User Manual
Page 125
PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-101
PROGRAM 45-1
LCR/TOLL RESTRICTION DIAL PLAN
IMPORTANT: The correct Dial Plan must be assigned to allow system LCR and/or Toll
Restriction to function properly.
NOTES:
1. Initialized data assigns Dial Plan Code 1 to the system.
2. In NXX and NNX, X = 0 ~ 9, N = 2 ~ 9.
3. NXX = Office code (interchangeable; 2nd digit can be 1 or 0).
4. NNX = Office code (not interchangeable; 2nd digit cannot be 1 or 0).
5. AC = Area Code.
6. 0+ and Universal (Codes 5 + 4) are not used in USA.
7. 1+ NNX indicates 1 may be dialed before office codes.
4
5
P
S
H
H
Z
Z
Enter codes 1 ~ 5 to indicate
the dial plan for the system.
DATA = Plan 1 ~ 5
SELECT = 1
S
Plan
1
5
4
3
2
1
Toll Restriction/LCR
Dial Plans
X
0+ (Note 6)
Universal (Note 6)
1+AC+NXX/NNX
1+AC+NXX/1+NNX (Note 7)
AC+NXX/1+NNX (Note 7)