TAG SV-2003-X2 - Manual (Page 31)

Chapter 3
SV-2003-X2 Server
Part Number: 1006446 Page 31 of 72
Version 1.0. 10/30/07
5 Procedures
The procedures within this Chapter contain
relevant information to ensure your SV-2003-
X2 Server maintains its maximum performance
potential.
5.1 Installing Red Hat 4.5 for S5000PAL and Adaptec 3805 system
1. Make sure that the supplied floppy is in a USB
floppy drive and attached to the system; be sure
the DVD is in the DVD-ROM.
2. With the hard drives set in RAID, enter BIOS and
confirm the boot order: [IDE PM:
MATSHITACD...], [AAR-3805 PCI-E RAI...], [IBA
GE Slot 0500 v...], [Y-E DATAUSB-FDU ...],
[[EFI Shell]]. (Figure 5.1)
Figure 5-1 Confirm Boot order
3. Once the computer boots to the Red Hat
Enterprise Linux 4.5 main screen (Figure 5.2),
type the following command as written: Press
Enter.