TAG SV-2003-X2 User Manual
Page 61
Chapter 3
SV-2003-X2 Server
Part Number: 1006446
Page 61 of 72
Version 1.0. 10/30/07
When you remove a drive using the Hot-Swap
operation, you need to stop the hard drive and
take it offline to remove the logical software
links to the hard drive, and to reconfigure the
file system so that it will now ignore the
removed drive. You might also have to
reconfigure your application software to
operate without the removed drive. Therefore it
is strongly recommended that you contact TAG
Technical Support at
before attempting to Hot-Swap a hard drive.
For more information on contact information
see document back page.
5.6.1 147GB SAS Hard Drive
Figure 5-52 147GB SAS HDD (Removed from HD Carrier)
5.7 Removing the Server Cover
The location of the mounting screws securing
the server cover varies per server . To remove
the cover, use a Phillips screwdriver to remove
all screws from the sides and top of the cover.