Think Outside Stowaway - Manual (Page 7)

5
Closing the Stowaway Portable Keyboard
1. Pull your handheld computer upward to remove it from the docking connector.
2. For Pocket PC users, fold down the docking connector.
3. Fold the rear support foot flat, and slide it into the keyboard.
4. With the unit still on a flat surface, slide the red end-grips apart and toward the ends of
the case. Make sure to slide the keyboard sections as wide apart as possible.
5. Lift the keyboard and push up from under the center to form a “W,” and then close.
6. Press the four corners of the case together until they snap into place.
Sliding the Stowaway Keyboard Ends Apart.
Folding the Stowaway Keyboard
Note: Pocket PC users, please skip to page 19