Tyco Electronics 0-1591093-X - Manual (Page 22)

24 and 16 Port Smart Switch II – User Manual Page 22
Adding VLANS
To Insert a VLAN I should be inputted and this will add a new VLAN.
Keep typing I to insert multiple VLANs. To select or deselect port
members use the U/D/L/R to navigate to the relevant port and press
the Space bar. A V indicates a port is a member of a VLAN, as
shown below: -
Figure 16 - Inserting VLAN Members
After all VLANS have been added and ports allocated then press A
to update the VLAN settings and revert the menu back to Display
mode. It is important that VLANs are then enabled in the System
Control Menu (see page 19) or VLAN functionality will not be
active.
Product Number 0-1591093-x 0-1591047-x Issue 1
© Tyco Electronics 2005