TP-Link TD-W8960N - Manual (Page 12)

TD-W8960N Wireless N ADSL2+ Modem Router User Guide
1.3.2 The Back Panel
The Router's ports, where the cables are connected, and RESET button are located on the back
panel.
Figure 1-2
¾ LINE: Connect to the Modem Port of Splitter or to the telephone line.
¾ 1, 2, 3, 4 (LAN): The ports (1, 2, 3, 4) connect the Router to the local PC(s).
¾ Reset Button: There are two ways to reset the Router's factory defaults.
1) Use the
Restore Default
function on Management -> settings page in the router's
Web-based Utility.
2) Use the Factory Default Reset button: With the Router powered on, use a pin to press
and hold the Reset button (more than 5 seconds) until the Internet LED becomes
quick-flash from slow-flash. And then release the button and wait the Router to reboot to
its factory default settings.
¾ POWER: The Power plug is where you will connect the power adapter.
¾ ON/OFF: The switch for the power.
¾ Wireless antennas: To receive and transmit the wireless data.
5