Hyundai H-CMD7079 - Manual (Page 17)

17
To mask both PI and strong signal non-RDS station.
Mute
Press MUTE button to activate the Mute function. Press it again or use the VOL knob on the panel or press
VOL+/VOL- buttons on the RC to cancel.
Adjusting clock
1. Press and hold DISP/END CALL button for more than 3 seconds to select the hour setting. Hour digits will
blink.
2. Rotate VOL knob to set the hours.
3. Press VOL knob to select the minute setting. Minute digits will blink.
4. Rotate VOL knob to set the minutes.
5. Press DISP/END CALL button, or leave the unit idle. Time setting is now confirmed.