Hyundai H-CMD7079 - Manual (Page 25)

25
Slow Motion
Press SLOW button on the RC to perform slow motion of the video play. Slow motion speed within 1/2 up to 1/8 will
be shown, according to the slowness. Cycle back to normal playback of press PLAY/PAUSE button to resume.
Multi-Angle View
Press ANGLE button on the RC to perform multi-angle playback. The number of angles is changed sequentially.
Note: The number of angles is different according to the disc.
The function only work for discs having scenes recorded at different angles. When no different angle is recorded, the
OSD will show “INVALID KEY”.
Video System
Press BND/SYS button on the RC or BND/NP/SUB button on the panel to choose between NTSC, PAL, PAL60,
AUTO, according to the encoding format of the disc. The default mode is AUTO. Use this function if there is
something wrong about the display function (e.g. no color is display).
Program Mode
Press ST/PROG button on the RC to set the program play. Use cursor buttons to set the chapter and track number in
your desired order. Press Enter item to begin the program play. Press ST/PROG button and confirm a blank program
again to cancel this operation.
Electronic Shock Protection
This unit is equipped with Electronic Shock Protection (ESP) so that the signal will be protected against rough roads:
ESP for DVD is 5 seconds.