2 general i2c error report, 11 tvp5154evm schematics, Error – Texas Instruments TVP5154EVM User Manual
Page 37
Advertising
www.ti.com
10.2.2
General I
2
C Error Report
11
TVP5154EVM Schematics
TVP5154EVM Schematics
The I
2
C Error Report shown in
appears when an I
2
C error occurs at any time other than after
the I
2
C system test. In this example, there is acknowledge error at slave address 0x54 (the video encoder
module). The error occurred on Read Cycle Phase 1 on the device (slave) address byte.
Figure 26. I
2
C Error
SLEU069A – February 2006 – Revised July 2006
TVP5154EVM User's Guide
37
Advertising