Tanaka TPB-400GX - Manual (Page 9)

Riding
Make sure that all of the bolts and screws are tightened.
Put one foot on the deck of the powerboard. While pushing off with the other foot, gently
squeeze the ACCELERATOR LEVER on the right side of the handlebars. The powerboard will
begin to move on its own power.
Control your speed by pressing and releasing the accelerator lever.
To stop, release the accelerator handle and depress the BRAKE LEVER (on the left side of the
handlebars).
FOLDING AND STORAGE
When you are done riding the Powerboard you can fold it down for compact storage, carrying
and transportation.
To fold down the Powerboard, use one hand to push down on the FOLDING HANDLE, while
using the other to gently push down on the handlebars. BE CAREFUL NOT TO HIT YOUR
HEAD WITH THE HANDLEBAR. Push down until you feel the mechanism lock into place.
You can now carry the Powerboard by the handlebar tube.
RECOMMENDED TOOLS
To adjust and maintain the Tanaka Powerboard you will need the following tools:
Allen Keys: 3/4/5/6mm.
Wrenches:
10/13/16 mm Open and ring
combination.
Large Adjustable Crescent Wrench
Philips Head Screwdriver
Oil, Grease or Lubricant (such as WD-40)
BRAKING SYSTEM
The Powerboard uses a front wheel disc/calliper system activated by a hand lever (on the left
side of the handlebar). The brake is activated by squeezing the BRAKE LEVER with your left
hand. The powerboard also has a rear-wheel friction brake that is activated by stepping on the
pedal located at the rear of the deck.
Practice braking on a smooth, dry surface to get used to the feel of the braking system. Braking
distance is affected by wet conditions and loose or uneven riding surfaces. Always be aware of
the surface you are riding on and provide plenty of distance for stopping.
Page 9