SINBO SK 2396 - Manual (Page 15)

-14 -
USING THE KEEP WARM TEMP SET
Press “SELECT” button once to change temperature.
98˚C 85˚C 60˚C 50˚C 40˚C
Primary setting at 85˚C
Press the “SELECT” button to select your ideal temperature.
* When the keep warm settings are set
at 98˚C ,85˚C ,60˚C ,50˚C ,40˚C Keep warm LED with be lit after boiling. If the water
temperature is below the selected settings, water will be boiled again and boiling LED
will be it.
* Temperature can be reset during warm keeping.(The device will RE-BOIL automatically
according to different hot water temperature.
98˚C: Suitable for cooking hot instant food and for hot beverages such as chocolate
drinks.
(always return setting to 85˚C after used.)
85˚C: Suitable for tea or coffee preparation at economical temperature.
50˚C/60˚C: Suitable for instant milk formulas and taking medication.
40˚C: Warm water
CLEANING AND MAINTENANCE
Before cleaning, ensure that power cord is pulled out, residue water is poured out and
device is cooled.
Inner pot & Inner cover
Clean device with a soft sponge and wash it with water.
Boiler scale should be cleaned every one month to three months with citric acid.
Do not scrub inner bottle with any metal objects, nylon brush or toothbrush etc or the
inner pot may peel off.
CAUTION:
* Always keep the lid away from you as there is hot steam trapped under the lid.
* Do not press the dispensing button when the inner water reservoir is empty.(Doing so
can cause damage.)
You cannot dispense hot water by Auto Dispense button or the Cup Switch if the pot is
unplugged.