Tempo vehicle - Manual (Page 16)

15
Vents
Part No. Model No. Description
100020 201V90 90° thru-hull vent, 5/8" I.D. vent hose,
accommodates hulls up to 1/2" thick,
chrome plated brass
90° Elbow Thru-Hull Vent
Made of chrome plated brass, this thru-hull
vent is fitted with a 90° vent hose connection.
For use with 5/8" I.D. vent hose and
accommodates hulls up to 1/2" thick.
Part No. Model No. Description
100050 205TVF10 Tank vent fitting, 5/8" I.D. vent hose,
male 3/8" NPT, brass
Tank Vent Barb
For use in attaching 5/8" I.D. vent hose to
the fuel tank for thru-hull ventilation. This
tank vent is brass and has a male, 3/8"
NPT pipe thread.
Part No. Model No. Description
100060 206ELB Tank vent elbow, male 3/8" NPT x
female 3/8" NPT, brass
200160 436ELB Tank elbow, male/female 1/4" NPT, brass
Tank Vent Elbow
Tempo’s tank vent elbow is designed for use
with the 100050 (Model No. 205TVF10) tank
vent where vertical space is limited. It is made
of brass, has a male, 3/8" NPT, and replaces
3/8" plug on fuel tanks.
200160
Part No. Model No. Description
100030 202THV Thru-hull vent, rectangular head, 5/8" I.D.
vent hose, accommodates hulls up to
1/2" thick, chrome plated, die-cast
100070 207THV Thru-hull vent round head, 5/8" I.D. vent
hose, accommodates hulls up to 1/2" thick,
chrome plated, die-cast
Thru-Hull Vents
Tempo’s die cast, chrome plated thru-hull
vents feature a flame arrestor screen made of
fine mesh stainless steel. Both are designed
for use with 5/8" I.D. vent hose and for hulls
up to 1/2" thick.
100030
Tee
Part No. Model No. Description
200050 404T59 Tee fitting, female 1/4" NPT, brass
Tempo’s brass tee has female, 1/4" threads
and is used to withdraw fuel from a single
tank for dual motors, or to withdraw fuel
from dual tanks for a single motor.
200050
100020
100060
100050
Valves, Ball Valves
& Hose Shut Offs
Stainless Steel Hose Clamps
Part No. Model No. Description
140010 300SOV Shut off valve, male/female 1/4" NPT, brass
140040 303FSO Shut off valve, two female 1/4" NPT, brass
Shut Off Valves
Made of forged brass, three combinations
of 1/4" NPT male and female ports.
Part No. Model No. Description
140030 302WV3 Three way valve, three female 1/4" NPT, brass
140060 305WV3 Three way valve, three female 1/4" NPT,
brass with detent
140070 312WV3 Three way valve, three female 3/8" NPT,
brass with detent
Three Way Valves
Tempo’s three way valves are made of forged brass,
come with either 1/4" NPT or 3/8" NPT female ports,
and are used to connect two permanent tanks to a
single motor. Selection of tank fuel withdrawal can be
performed by rotation of valve handle. The detent
in a valve allows exact location of port openings,
providing maximum flow.
Part No. Model No. Description
140050 304WV4 Four way valve, four female
1/4" NPT, brass
Four Way Valve
Tempo’s four way valve is made of forged brass, has
four 1/4" NPT female ports, and is used to connect
three permanent tanks to a single motor. It provides
for withdrawal from one tank at a time only.
140010
140030
140050
Part No. Model No. Description
150010 T80 Two way valve,
male 1/4" NPT x female 1/4" NPT, brass
150020 T80A Two way valve, male 1/4" NPT x
3/8" barb, brass
Two Way Valves
Tempo’s two way valves are made of forged brass,
have 1/4" NPT male port, and are used to connect a
permanent tank to a single motor.
150020
Part No. Model No. Description
100040 204VHC Vent hose clamp, 5/8" I.D.
200080 422FLC Fuel line clamp, 1/4" to 5/16" I.D.
200090 423FLC Fuel line clamp, 3/8" to 5/8" I.D.
Teflon ™ Tape
Tempo’s teflon tape is ideal for all male threaded fittings. It seals any
difference on thread surfaces, protecting against leaks. It acts as a
lubricator during tightening of the fitting. Safe on
metal or plastic thread surfaces. Works great on
connectors, hose barbs, faucets and other
threaded surfaces.
Part No. Model No. Description
200300 TT1 Thread seal tape
200300