Tempo vehicle - Manual (Page 20)

• Installs on inboard engines in seconds
without tools
• Telescoping tube provides precise
alignment for hard to reach areas
• Flush away sand, silt and alkali
while the boat is on land
• Large cup ensures no fall-off and water
blow-by during flushing operation
Tempo motor flushers prevent clogging and corrosion by flushing away sand, silt,
salt, and alkali, thereby extending engine life. All units install in seconds without tools.
• Part No. 380170 (Model No. 962RMF) and Part No. 380160
(Model No. 963PMF) offer rectangular cups to help prevent
fall-off, slippage, and water blow-by during flushing operation
• All models work great in low water pressure conditions, which
are prevalent around marinas
• Part No. 380110 (Model No. 958SMF) and Part No. 380160
(Model No. 963PMF) offer dual water feed and are
recommended for engines exceeding 75 h.p.
15
380080
Part No. Model No. Description
380190 965IBF Adjustable inboard flusher
Adjustable Inboard Flusher
300120
Motor Flushers and Application Chart
Part No. Model No. Description
300120 655TTP 11-1/4" x 15"
• Protects the transom and reduces noise
• Perfect for inflatables and dinghies
• Made of oil and weather-
resistant rubber
Transom Pad
Part No. Model No. Description
015403 403TTR 20" x 16" (320 sq. in.)
Cleans any paintable surface
of dust, dirt, and sanding
residue; results in a smooth,
blemish-free finish.
Tack Rag
015403
19
380190
380190
(in use)
Deck Plate Fills
Part No. Model No. Description
100010 141HCO Replacement cap for deck fill
040010 109DPF Deck plate fill
Tempo’s deck plate fills are screw
mounted and designed with a
splash lip. For use with 1-1/2" I.D.
fill hose. Manufactured with chrome
plated casting.
040010