Tiger Products Co., Ltd RBF-12C - Manual (Page 49)

Assembly Section 3-15 RBF - 12C 07-04
ASSEMBLY
© 2004 Alamo Group Inc.
WARNING ! All Tiger Boom Mowers mounted on Non-Cab Tractors require without exception a suitable
Operator Protective Safety Screen be installed before operating to prevent Operator injury
by objects thrown by the blades. The Operator Protective Safety Screen may be ordered
with the machine or from the Extra Equipment Section (For your particular tractor, some
modification to this Safety Screen may be necessary.)
A protective safety screen may be constructed and attached to the tractor and the tractor ROPS (Roll
Over Protection System) only if it conforms to the following:
1. The Right side and top of the operators compartment must be completely protected as shown. In
the case of a tractor with a ROPS mounted hard canopy, only the right side will need to be pro-
tected.
2. Only use clamp type attachment on the ROPS. Do not drill, tap, or weld to the ROPS. You may
(provided that it is strong enough) attach L-brackets to the fender and to the floor board, to secure
the rest of the cage.
NOTE:
Tiger, cannot be held responsible for any injury resulting from the failure of any Owner/Operator con-
structed Protective Safety Screens. The information provided here is only a guideline for the construction
of a simple but effective operator protective structure which must be used with a ROPS for overturn protec-
tion.
Ref No. Part Description No Req. Part No.
1 Window Assembly 1 31890
Frame - 31726
Window Pane - 31850
Pop Rivet - 6T3954
2 Hex Nut 1/2" NC 8 21990
3 Lockwasher 8 21725
4 Capscrew 1/2" X 3" NC 4 21737
5 Bracket 2 31725
6 Capscrew 1/2"X 1-1/2" 4 21730
7 Bracket 2 31724
8 Bracket** 1 31944