Toastess Carousel Convection Oven/Broiler TTO652 - Manual (Page 6)

HOW TO USE
1. General Instructions
Always use the appropriate accessory for the type of cooking
selected. (Read instructions that follow). The accessories provided
are designed specifically for the Oven. Some of your own
ovenware (loaf, muffin tins, bundt or spring form pans) may also
be used provided they are oven safe and leave an open space
all around to permit the fan forced air to circulate. Heat resistant
ovenware should only be used if they can be placed at least 2”
(5 cm) away from the heating elements. Food and/or containers
must never touch the Elements or the oven interior or interfere
with closing the Door.
• Be careful not to bang elements.
• Never use glass or ceramic lids.
• Never use plastic or cardboard containers in the Oven.
• Remove all cardboard covers from aluminum containers. If
necessary, cover ovenware with aluminum foil tucked tightly
around the edges.
• Do not allow foil to touch Oven sides or Heating Elements.
• Never cover the Broiling Drip Tray, Carousel or Crumb Tray with
aluminum foil as this could cause accumulated grease or crumbs
to ignite.
• Always use oven mitts when removing hot racks or pans.
• Always press the “STOP” button when cooking is complete.
2. Wire Rack Positioning
The Oven is equipped with 2 Wire Racks which can be slid into
either of the three levels provided for the racks during cooking
with the Convection Fan. NOTE: Only one Rack should be used if
the Convection Fan is not being used during cooking.
3. Pizza Carousel Assembly
Place the Drive Shaft of the Pizza Carousel Assembly into the hole
on the right hand side of the oven cavity. The left side of the Pizza
Carousel Assembly will rest on the Carousel Assembly Support.
Place the Pizza Carousel onto the Pizza Carousel Assembly so that
the center hole in the Carousel fits inside the center hole of the
Pizza Carousel Assembly.
6
Booklet_TTO652_ENG.qxd:Salton Booklet 8/16/10 12:11 PM Page 6