Topcom BUTLER 4552 User Manual
Page 22
22
Topcom Butler 4552/Twin/Triple/Quattro
Topcom Butler 4552/Twin/Triple/Quattro
When a handset is associated with a base, it is attributed a handset number by the base. It
is this number that is displayed on the handset after the name and must be used for internal
calls.
6.2
Removing a handset
You can remove a handset with a base to allow another handset to be registered
1.
Enter the menu by pressing /OK
2.
Select SETUP using the up and down keys
3.
Press OK
4.
Select DEL HANDSET using the up and down keys
5.
Press OK
6.
Enter the 4 digit base PIN code
7.
Press OK
8.
Select the handset to be removed
9.
Press OK to validate
6.3
Setting up a handset on another base
If you want to use a Butler 45xx handset with a base of another model. The base must be
GAP compatible.
1.
To put the base in registration mode, refer to the base user manual.
2.
Carry out operations 3 to 10 from the paragraph 6.1.
6.4
Selecting a base
The handsets can be registered up to 4 bases simultaneously.
To select a base:
1.
Enter the menu by pressing /OK
2.
Select REGISTER using the up and down keys
3.
Press OK
4.
Select SELECT BASE using the up and down keys
5.
Press OK
6.
Select a base or select AUTO using the up and down keys
7.
Press OK
When selecting the base, the currect selected base in indicated by a blinking base number.
If you select ‘Auto’ the handset will automatically search for another base when you are out
of range!
DECT GAP Profile only guarentees that basic calling-functions will work
correctly between different brands/types. There’s a possibility that
certain services (like CLIP) will not work correctly.