Toshiba B-EP4DL - Manual (Page 10)

(11) ［POWER］ button
Turns on or off the printer.
How to turn on the printer
While the printer is off, hold down the POWER button for a few
seconds. When “ONLINE” is displayed on the LCD, the printer is
ready.
How to turn off the printer
Hold down the POWER button until the LCD goes off.
(12) [FEED］ button
Feeds media or reprints a previously printed data.
Function of the [FEED] button differs depending on the issue mode.
(13) [PAUSE］ button
Temporarily stops media issue or restarts printing.
Used to reprint the previous data after an error is cleared.
Loading a battery pack
Pushing aside the Battery Lever with the Battery
Pack, insert the Battery Pack into the printer to the
bottom. The Battery Pack is locked by the Battery
Lever.
Be careful of the orientation of the Battery Pack.
Notice
• Be sure to use a battery pack designed and
manufactured for use with the specific model.
B-EP2DL series: B-EP802-BT-QM-R
B-EP4DL series: B-EP804-BT-QM-R
• When unpacked, the battery level of the supplied
Battery Pack is not full. Please charge the Battery
Pack with an optional Battery Charger or load the
Battery Pack in the printer and connect an optional
adapter before using it.
♦Single-slot Battery charger: B-EP800-CHG-QM-R
♦6-slot Battery Charger: B-EP800-CHG6-QM-R
♦AC Adapter: B-EP800-AC-QM-R
♦Cigarette lighter adapter: B-EP802-DC12-QM-R
♦DC adapter: B-EP800-DC48-QM-R
DO NOT CONNECT any device other than the above
to the printer.
［ B-EP2DL Series］
［ B-EP4DL Series］
Battery Pack
Battery Pack
Battery Lever
Battery Lever
1.If the battery pack leaks liquid or gives out smoke or bad smell, immediately stop using it and keep it
away from fire. Failure to do this may cause explosion or combustion.
2.In the United States, used lithium ion batteries should be returned to the store where you bought the
machine. (USA only)
3.LITHIUM ION BATTERY DISPOSE OF PROPERLY
Caution: Do not handle damaged or leaking lithium ion battery.
WARNING!