Toshiba S2T - Manual (Page 7)

Page 7
UDP Receive:
RECV instruction is used, ▬ [ A RECV B ] ▬
A
: H3100 (fixed)
B
: Result status
A+1 : UDP receive command (H0033) B+1 : Error code
A+2
: Socket number (1 to 12)
A+3 : Sender IP address (note 1)
A+4 : Ditto
A+5
: Sender Port number
A+6 : Receive data word size (1 to 1000)
A+7
: Destination data table register type (note 2)
A+8 : Destination data table register starting address
A+9
: Timeout setting (0.1s units, see note 3)
Note 1: If sender IP address is 192.0.0.5 (HC0.0.0.5), set as follows.
A+3 = H0005
A+4 = HC000
For broadcast receiving, set 0.0.0.0.
Note 2:
RW register = 3
D register = 4
Note 3: If A+9 = 0, there is no timeout.
Sample program
12544 = H3100
51 = H0033
Socket number = 2
Sender IP address = 192.0.0.5 (-16384 = HC000)
Sender Port number = 5000
Receive word size = 100
Destination data table is D2000 and after, no timeout setting