Tech4o Alti-Ski - Manual (Page 10)

18 19
10.1 Descent Mode - Trip Descent
• In descent mode, the default view is the total trip descent view.
• To clear/reset the total trip descent, press and hold the [s/+]
button for 2 seconds.
10.2 Descent Mode - Rate of Descent
• In descent mode, press the [o/-] button once to view the current
rate of descent.
• To clear/reset the current rate of descent, press and hold the
[s/+] button for 2 seconds. Note that the current rate of descent
automatically recalculates every minute also.
10.3 Descent Mode - Maximum Rate of Descent
• In descent mode, press the [o/-] button twice to view the maximum
rate of descent for the trip.
• To clear/reset the maximum rate of descent, press and hold the
[s/+] button for 2 seconds.
10.4 Descent Mode - Total Daily Descent
• In descent mode, press the [o/-] button 3 times to view the total
daily descent.
• The total daily descent is automatically reset at midnight.
10.5 Descent Mode - Total Lifetime Descent
• In descent mode, press the [o/-] button 4 times to view the total
lifetime descent.
• To clear/reset the total lifetime descent, press and hold the [s/+]
button for 2 seconds.
11.0 Ascent Mode - Display
In ascent mode, the watch will display the
total trip ascent on the top row and the
current home time, current temperature,
or the run counter on the second row
depending on your personal preference.
• To view ascent mode, press the [m] button
until the mode indicator displays the up
arrow.
11.1 Ascent Mode - Trip Ascent
• In ascent mode, the default view is the total trip ascent view.
• To clear/reset the current rate of ascent, press and hold the [s/+]
button for 2 seconds.