Transcend Information 32MB4GB - Manual (Page 20)

18
Error Messages of Boot-Up Function
The initialization of the Boot-up Function or installation of the OS is probably incomplete.
Please make sure that the path C:\WINDOWS\COMMAND\EBD exists in Windows 98/98SE,
Me or XP. If yes, return to step 1 to re-initialize the Boot-up Function. If this fails, the Boot-up
Function does not support your computer.
The Write-Protect switch is set to Locked ( ). Please reset the Write-Protect switch to
Unlocked (
).
Recovery Function
If your JetFlash is ever damaged, you can use the RecoverDisk program to restore its
default settings.
Running the RecoverDisk program will erase all the data on JetFlash.
If there are bad blocks in the flash memory chip of JetFlash, the memory size of
JetFlash after running the RecoverDisk program will be smaller than the original
memory size.
Skip steps 1-2 if the U-Storage Tool has already been installed.
1. Put the Driver CD into the CD-ROM drive (Auto-Run supported). Click the U-Storage Tool
button.